Can I do any electrical work myself? +
You can legally carry out minor electrical work such as replacing light switches, sockets (like-for-like), and light fittings without notifying building control. However, you must not add new circuits, work in bathrooms or kitchens (within zones), replace a consumer unit, or install outdoor wiring unless you are Part P registered. DIY electrical work is a leading cause of house fires — if you are unsure, always call a qualified electrician in Oxford.
Do I get a certificate after electrical work is completed? +
Yes — for any notifiable electrical work (new circuits, consumer unit replacements, bathroom/kitchen installations), your electrician must issue an Electrical Installation Certificate and notify your local building control. For smaller jobs like replacing a socket or light fitting, you should receive a Minor Electrical Installation Works Certificate. Keep these certificates safe as you will need them when selling your property.
What is Part P and why does it matter? +
Part P of the Building Regulations covers electrical safety in dwellings. Certain types of electrical work — including new circuits, consumer unit replacements, and work in bathrooms or kitchens — are classed as notifiable and must either be carried out by a Part P registered electrician or inspected by building control. Using a registered electrician saves you the building control fee (typically £200–£300) and ensures the work is properly certified.
How often should I have my electrics inspected? +
The IET Wiring Regulations recommend an electrical inspection (EICR) every 10 years for owner-occupied homes, every 5 years for rented properties (this is a legal requirement for landlords), and every 5 years for commercial premises. If your home was built before 1980 or has never been inspected, it is worth booking an EICR sooner. The inspection will identify any deteriorated wiring, missing earthing, or outdated components.
What is the difference between an RCD and an MCB? +
An MCB (Miniature Circuit Breaker) protects against overcurrent and short circuits — it is the modern equivalent of a fuse. An RCD (Residual Current Device) protects against earth leakage, which is what can kill you if you touch a live wire. Modern consumer units use RCBOs, which combine both functions into a single device per circuit, giving you the best protection. If your consumer unit still has rewirable fuses, it is overdue for an upgrade.
What should I do if I smell burning from a socket or switch? +
Switch off the circuit at the consumer unit immediately and unplug everything from the affected socket. Do not use the socket again until it has been inspected by a qualified electrician. A burning smell from electrical fittings usually indicates overheating caused by loose connections, overloaded circuits, or deteriorated wiring — all of which are fire hazards. Call an emergency electrician in Oxford straight away.